Rapid Dry Alkyd Enamel is a high-performance, quick-dry, rust-preventive shop enamel formulated for use on ferrous metal substrates. Rapid Dry Alkyd Enamel is excellent for use in shop application facilities in the fabrication market, and also is ideal for use in the industrial refurbishment market as an implement, dumpster, machinery, or construction enamel.
Rust Arrestor is a water-based, film-forming primer that chemically transforms rust, halting the corrosion process and enabling the surface to accept a topcoat. When applied over tightly adhering rust, it forms a black, protective film.
Shop Primer is an economical steel primer for commercial use in mild to moderate exposures. This product is ideal as a temporary transport coat on fabricated pieces or as an economical barrier primer. It is a temporary coating. This primer may be top-coated with a wide variety of finishes. However, finishes containing strong solvents (Ketones, Xylene, Toluene) may cause wrinkling or lifting of Shop Primer.
Silicone Alkyd High Heat is designed to protect steel that is exposed to heat ranges up to 425 °C (800 °F). This product exhibits excellent weathering, resists mild industrial chemicals and moisture and is specific to industrial use.
Urethane Reducer is 100% butyl acetate for use in thinning catalyzed acrylic urethanes. Effective for cleaning equipment immediately after use as well. Do not use this product for cleaning synthetic brushes or rollers, as it will dissolve them.
Waterborne Acrylic Epoxy is a two-component epoxy that offers unique features such as low odour and application over slightly damp surfaces. For use on properly prepared interior & exterior ferrous metal, galvanized metal, wood, plaster, masonry and drywall surfaces that are subject to moderate abrasion or mild chemical exposures. Not recommended as a heavy-duty floor finish.
Waterborne Amine Epoxy is formulated to provide good chemical, abrasion and impact resistance on a variety of commercial and industrial surfaces, including steel, iron, concrete, non-ferrous metals, wood and drywall. Particularly suited for use on concrete floors. This waterborne product has lower odour than solvent based epoxies, is easy to apply, and thus can be applied in occupied areas. Additionally, this product can be applied to many existing generic coating types with less risk of lifting or wrinkling.
When used on floors, this product provides moderate- to heavy-duty protection in commercial environments exposed to frequent foot traffic and occasional traffic of lightweight rubber-tired vehicles, intermittent spillage of mild chemicals, occasional steam cleaning, and powerwashing.
Waterborne Bonding Primer is a one-component bonding primer that may also be used as a rust-inhibitive universal primer. This product bonds to various metals creating a solid foundation for finishing coats. This product may be finish coated with a wide variety of coatings including alkyds, acrylics, epoxies, urethanes and moisture cured urethanes. Because of its versatility on all metals, Waterborne Bonding Primer will replace traditional wash coat primers and offers an easier-to-use alternative for all projects.
This coating produces an extremely durable, chemical-resistant surface with the benefits of low odour and soap and water clean-up. Provides outstanding gloss retention and resists scratches and abrasion.
Xylene is an aromatic solvent that can be used in numerous industrial coatings systems as a general thinner and clean-up solvent. Use to modify evaporation rates and improve dry. For effective cleaning of tools and equipment.
Rubber Based Swimming Pool Paint provides a durable low-sheen finish for use in residential and commercial concrete pools. It delivers excellent chemical and abrasion resistance and is suitable for use in fresh or salt water. Also acceptable for use in chlorinated pools. Use Rubber Based Swimming Pool Paint over previous chlorinated rubber paint or synthetic rubber-based pool paint or over bare concrete, marcite, gunite, or other masonry surfaces in good condition.
Waterborne Swimming Pool Paint is a low-VOC coating that can be applied to slightly damp surfaces, dries quickly for recoating, and withstands continuous submersion in fresh or salt water. Use Waterborne Swimming Pool Paint over most types of properly prepared existing pool paints, as well as bare concrete or plaster, marcite, gunite, and other masonry surfaces in sound condition.
Transform any concrete floor into a beautiful surface with Insl-x Decorative Floor Flakes. Easy to use and available in seven different colour combinations, these flakes can disguise surface imperfections and help hide dirt.
Great for residential and commercial floors:
Sure Step Acrylic Anti-Slip Coating provides a durable, skid-resistant finish for interior or exterior application. Imparts excellent colour retention, abrasion resistance, and resistance to ponding water. Sure Step is water-reduced which allows for fast drying, easy application, and easy clean up.
TuffCrete Waterborne Acrylic Waterproofing Concrete Stain is a water-reduced acrylic concrete coating designed for application to interior or exterior masonry surfaces. It may be applied in one coat, as a stain, or in two coats for an opaque finish.
GarageGuard is a water-based, catalyzed epoxy that delivers superior chemical, abrasion, and impact resistance in a durable, semi-gloss coating. Can be used on garage floors, basement floors, and other concrete surfaces. GarageGuard is cross-linked for outstanding hardness and chemical resistance.
